Numerical analysis of oil combustion in a small combustion device

Keywords: oil burner, oil combustion, multicomponent reactive flow, computational fluid dynamics (CFD), model validation

Abstract

This paper focuses on the numerical analysis of the combustion of the liquid fuel Extra Light Fuel Oil (ELFO) in a small combustion device. The calculation was performed by ANSYS CFX computer code for experimental optimal air-fuel ratio (λopt) and the middle power of the oil burner Weishaupt WL5/1-A (37 kW). The goal of the numerical analysis was to establish, whether the experimentally determined λopt ensured the conditions for a complete combustion in each point of the combustion chamber. The comparison of numerical results and measured values confirm the suitability of the chosen numerical model.

Downloads

Download data is not yet available.

Author Biographies

Matej Zadravec, aculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia

Maribor, Slovenia. E-mail: matej.zadravec@um.si

Boštjan Rajh, EnerB d.o.o., Hmeljarska ulica 7, 3310 Žalec, Slovenia.

Žalec, Slovenia. E-mail: bostjan.rajh@enerbee.eu

Niko Samec, Faculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia.

Maribor, Slovenia. E-mail: niko.samec@um.si

Matjaž Hriberšek, Faculty of Mechanical Engineering, University of Maribor, Smetanova 17, 2000 Maribor, Slovenia.

Maribor, Slovenia. E-mail: matjaz.hribersek@um.si

Published
2022-06-07
How to Cite
Zadravec M., Rajh B., Samec N., & Hriberšek M. (2022). Numerical analysis of oil combustion in a small combustion device. Anali PAZU, 4(1), 41-50. https://doi.org/10.18690/analipazu.4.1.41-50.2014
Section
Prispevki